AquaSparkle Bromo Boost - 2KG

AquaSPArkle Spa Bromo Boost
Boosts Bromine Levels for Ongoing Activation and Effective Sanitisation.

AquaSPArkle Spa Bromo Boost is designed to boost bromine levels in hot tubs for ongoing activation through the use of complementary oxidisers or via bromine generator electrolysis units that convert bromide into hydrobromite solutions.

Key Features/Characteristics:
Use with bromine electrolysis.
Granular formula.
Designed for use with complimentary oxidisers or bromine generator electrolysis units (e.g., in.clear).
Enhances bromine levels for effective water sanitisation.

Application Instructions:

1. Maintain pH levels within the ideal range of 7.2 – 7.6. If the level is not in this range, adjust.

2. This product may be applied directly to hot tubs while the spa pump(s) are turned “on” to aid distribution.

3. Allow 30 minutes for general distribution prior to activating bromine with oxidisers or an electrolysis unit.

4. Before bathing commences, test the water and maintain bromine residuals within the recommended range of 3 – 5mg/l (ppm). When using bromine generator electrolysis units (e.g., in.clear), use the boost mode to raise bromine levels if necessary. If bromine levels exceed 10mg/l (ppm), turn off the electrolysis unit until the bromine level falls to 5mg/l (ppm) or below.

5. It is recommended that hot tub water is periodically changed and replaced. If draining and re-filling is carried out within 60 days, there is no need to top-up with Spa Bromo Boost, in which case use the initial dose as below on re-fill. If draining and re-filling is delayed beyond 60 days, use the top-up dose as below.

Water Volumes:
Litres: 1,000 / 1,500
Gallons: 220 / 330

Dose Rates:
Initial Dose (if required):
1.2kg for 1,000L / 220 Gallons
1.8kg for 1,500L / 330 Gallons
60 Day Top-up Dose (if required):
0.6kg for 1,000L / 220 Gallons
0.9kg for 1,500L / 330 Gallons

Compatible Systems:
Suitable for Gecko in.clear systems, such as on the LA Spas hot tub range.