Platinum Spas PH- Reducer/Minus – 1.5kg

Product Description

Platinum Spas PH- Reducer/Minus - 1.5kg

The Essential Water Balancer

Maintain the perfect water chemistry for your hot tub. Platinum Spas pH Minus is formulated to lower your spa’s pH levels, ensuring your water remains comfortable for bathing and your equipment stays protected from scale and corrosion. This product also serves as an effective agent for reducing Total Alkalinity levels above 150mg/l (ppm).

The Ideal Range:

Hot Tubs pH Level: 7.2 – 7.6

Total Alkalinity: 80 – 150mg/l (ppm)

If your test strips show levels above these figures, use Platinum Spas pH Minus to restore the balance.

Platinum Spas Pro-Tip

For the most accurate results, always test your water when the pumps have been running for at least 15 minutes. Testing "stagnant" water can give you an incorrect reading, leading to over-dosing. Depending on your water hardness, multiple treatments may be required to achieve the correct balance.

Specifications:

Type: PH- Reducer

Size: 1.5KG

Form: Powder

Brand: Platinum Spas

Usage Instructions:

Always Read the Label for Full Instructions

Preparation: 

Pre-Dissolve: Always pre-dissolve the product before adding it to your spa. Use a clean plastic container with warm water.

Ratio: Max 10g of product per 1 litre (0.2 gallons) of water.

Stir well until the product is fully dissolved.

Application:

1.  Add to the Spa: With the spa pump(s) running, carefully pour the dissolved solution into the water.

* For Total Alkalinity Reduction: Pour the solution into one specific area in the middle of the spa to ensure proper distribution.

2.  Wait & Test: After a minimum of 30 minutes, re-test your water. If levels remain high, repeat the treatment until the ideal range is established.

Store Chemicals in a Cool, Dry Place away from Children